netgear n150 wireless usb adapter manual

If your hub does not appear, press the ( ? ) icon in the upper right corner.

From the CONNECT TO HUB screen, wait approximately one minute for your hub to appear.If the the Harmony mobile app was working with the Harmony hub but is no longer able to establish a connection, you may be able to perform a deeper network scan to re-establish communication. (You may need to select More > to see this option) Select Set up / Change Wi‑Fi Settings and follow the on screen prompts.Select the Settings tab on the left side of the screen.Select your remote from the Remote Gallery.Sign into your account using the MyHarmony desktop software.Use these steps to re-configure Wi‑Fi settings using the MyHarmony desktop software. Here's a list of other common names for this setting. This is referred to as Internal Station Connection by many manufacturers, but not universally. Some routers have a setting that prevents two Wi‑Fi devices from communicating with each other, and will only allow a Wi‑Fi connected device such as your mobile device to communicate with devices connected using a network cable. Harmony Hub is not compatible with 5GHz Wi‑Fi frequencies.

If you have a 2.4GHz and 5GHz compatible router, try connecting your mobile device to the 2.4GHz network.

Power cycle your router by unplugging it from its power adapter, waiting 10 seconds and then plugging it back in.

The hub will take 30 seconds to power on.

Unplug the hub from the power adapter, wait 10 seconds and then plug it back in.

Harmony Elite and Ultimate remotes can check what Wi‑Fi network the hub is on by navigating to Menu > Settings > General > About.

Check that the Harmony mobile app is connected to the same Wi‑Fi network name as Harmony Hub.

If Harmony Hub connected to Wi‑Fi during setup, but the Harmony mobile app is not able to discover it, try the following:

Netgear n150 wireless usb adapter manual